ARB 3932020 User Manual
Page 7
Advertising
13/6/08
Page 7 of 11
3786950
TO FIT WINCH INTO BAR
16. If vehicle is to be fitted with a winch, follow
the next steps.
Handle is in normal position
17. Rotate handle 144° counter clockwise.
18. Stand winch upright and undo the capped
head screws and by lifting the gearbox only a
couple of millimetres, rotate the gearbox.
Once in position, refit all screws and tighten
firmly.
WARNING
Do not lift gear box more than a couple of
millimetres.
19. Drill out roller fairlead 25mm lower than
original hole using a 12mm drill bit
.
NEW HOLES
Advertising