L.B. White COMBO-MCS - Manual (Page 5)

Locating and Mounting
L Location
-- Locate in a corridor or control room on the wall
adjacent to or close to the existing room controller.
See Fig.3.
-- This area should be dry and not exposed to water
washdown.
-- The temperature in this area must be between 32F
and 104F.
FIG. 3
Mounting
-- Use mounting tabs and screws provided with the
SmartBox
™
at all corners of the box back. See Fig.4.
-- Use proper hardware to secure the SmartBox
™
to
the wall surface
-- Provide sufficient clearance to allow complete
opening of the SmartBox
™
cover.
FIG. 4
Wiring Diagram
5