Fast & Fluid SK550 - Manual (Page 10)

p10
Fast & Fluid Management - SK550
Please take care to store the frame lock for later use, it is essential for
correct transportation.
Step 3 - Detach shaker from its transport skid
>
Pull out cord to remove frame
lock’s loose parts. Ensure all loose parts have
been removed – two bolts
and two wooden blocks.
For optimal mixing results and silent operation it is essential to correctly
level the machine and lock the adjustable feet.
Step 4 - Place the machine in its final operational position
> >
Lower the adjustable feet far
enough to lift the machine off
its wheels. Take care to correctly level
the machine (by turning the
adjustable feet). Lock all adjustable feet by
tightening the their separate
bolts.
Tip: before locking the adjustable feet, start a mixing cycle with a small
load (<5kg). While the SK550 runs, check if all four feet are firmly in
contact with the floor and then lock them.