Fast & Fluid SK550 - Manual (Page 13)

p13
Fast & Fluid Management - SK550
Step 3 - SK550 Control interface
Emergency stop
for shutting off
power completely
Program key
sequential series
of mixing programs
Timer keys
program start
& can clamping
Stop & Up
program stop
& unclamping
Various user settings are available in the User Mode menu.
B - Operating the SK550
Step 1 - Place can, choose program and start program
> >
Place the container in the can
table center, place filler disc
and attach hook to container
handle. Close door. If your SK450 is
fitted with an electric door,
skip this step as it will close
automatically later. Choose correct program and
press desired timing button.
Clamping and mixing will now
start.
Attention! The mixing program will not start unless the door is closed.