Apple Workgroup Server 8550 User Manual

Page 103

Advertising
background image

Note: The Workgroup Server 7250 has one SCSI bus, and the Workgroup
Server 8550 has two SCSI buses. On a Workgroup Server 7250, all SCSI
devices must have unique ID numbers because they are on the same SCSI
bus. On the Workgroup Server 8550, devices on different SCSI buses can
have the same SCSI ID number.

m

If you installed an additional CD-ROM drive, make sure the CD-ROM
software that came with the drive is installed. See the manual that came
with the CD-ROM drive for software installation instructions.

m

If you reinstall the CD-ROM software, make sure to restart your server
after you reinstall the software.

You installed an additional CD-ROM drive and your server won’t restart
after you’ve copied software for the additional CD-ROM drive to the
System Folder.

m

If you attempt to install software for an additional CD-ROM drive
without using the Installer, you may not be able to restart your server.
Restart the server while holding down the Shift key (to turn off system
extensions), and then remove any CD-ROM software files you copied by
dragging them to the Trash. Reinstall the software according to the
instructions that came with the drive.

If this procedure doesn’t solve the problem, restart your server using the
Workgroup Server Software CD-ROM disc. (For instructions on starting
your server using a CD-ROM disc, see “Starting Up From a CD-ROM
Disc” in Chapter 4.)

Your server starts up and you see large folder-shaped areas, containing
labeled pictorial buttons, instead of the usual Macintosh desktop.

m

Your server may have started up from a CD-ROM disc containing At
Ease, an alternative to the Macintosh desktop.

To return to the Macintosh desktop, choose Shut Down from the Special
menu. When your server is off, press the Open/Close button of your CD-
ROM drive to open the tray, then remove the CD-ROM disc. Close the
tray. Then start up your server again.

To avoid having the server start up from a CD-ROM disc, remember to
remove any disc in the drive before you shut down your server.

103

Advertising
This manual is related to the following products: