Apple Workgroup Server 8550 - Manual (Page 64)

11 Make sure that the hard disk named in the box is the one on which you
want to install system software.
If it isn’t, click Switch Disk until the correct disk name appears.
12 Click Install.
13 Follow the instructions that appear on the screen.
If you’re installing system software from floppy disks, you see messages
asking you to insert different disks.
14 When you see a message reporting that the installation was successful,
click Restart (or “Quit,” if you’re installing from the CD-ROM disc).
Don’t forget to eject the CD-ROM disc containing system software. If a
message reports that installation was not successful, try installing again.
(Follow the instructions on the screen.)
If, after reinstalling system software by doing a normal installation, you
still experience problems with your server, follow the steps in the next
section for doing a “clean” installation of system software.
IMPORTANT Certain system extensions or application programs that were
originally on your hard disk may not be installed with the Installer
program. If you notice that a certain extension or program was not
installed, you need to install it separately. You can find these additional
extensions and programs on the Workgroup Server Software CD-ROM disc.
(Application programs from other vendors can be reinstalled from backup
copies you made.)
64
This is the disk on which system
software will be installed.
Click to indicate
a different disk.