Apple Workgroup Server 8550 - Manual (Page 31)

10 Enter in the “Additional Search domains” box the names of any other
domains that you want to search.
You can enter more than one domain name. Press Return after each domain
name. You can specify as many domain names as you want as long as you
do not type more than 255 characters.
The domain names that you enter are used exactly as you type them and
are not put together in different combinations. For example, if you specify
“apple.com,” “university.edu,” and “nowhere.org” in the “Additional
Search domains” box, and you specify that you want to search for a
computer named “eng,” TCP/IP will search for these computers:
eng.apple.com
eng.university.edu
eng.nowhere.org
11 Close the TCP/IP control panel.
12 If you have made configuration changes, an alert box asks if you want to
save changes. Click the Save button.
If you have changed the default port, the alert box also tells you that the
change will interrupt any TCP/IP services that are established.
Your changes are saved as the default configuration and take effect
immediately.
If, after configuring the TCP/IP control panel, you see an error message
such as “Unable to locate host” or “Could not create a socket,” your
software is unable to reach the network. This indicates a problem in the
TCP/IP configuration. For troubleshooting information, see Chapter 7.
31