Apple Workgroup Server 8550 - Manual (Page 3)

How to use this guide
If you are new to Macintosh: Refer to Appendix A, “Getting Help,” to learn
how to use the features of Mac OS and application programs.
Configure your server’s system software. See Chapter 1, “Configuring Your
Server,” for information about how to configure your server’s system
software for optimal performance.
If necessary, configure your server’s network connection. Your server
automatically uses the built-in Ethernet port for AppleTalk connections. See
Chapter 2, “Configuring Your Network Connection,” for information about
how to configure your server to use a different port for AppleTalk or how
to configure your server’s TCP/IP network connections.
Learn about application software. See Chapter 3, “Using Application
Software,” for information about Power Macintosh programs and the
shared libraries that they use and for information about running older
Macintosh programs. See Appendix C for information about obtaining
updates for Apple software products.
Learn about hard disk management. See Chapter 4, “Managing Hard Disks,”
for information about initializing hard disks and installing system software.
Familiarize yourself with the server’s built-in CD-ROM drive and optional DAT
drive. See Chapter 5, “Using the CD-ROM Drive,” and Chapter 6, “Using a
DAT Drive and Tape Cassettes.”
Review troubleshooting techniques. See Chapter 7, “Troubleshooting,” for
steps you can take to prevent the occurrence of problems and for solutions
when problems occur.
3