Apple Workgroup Server 8550 - Manual (Page 23)

3 To change the default port, choose a new port from the “Connect via”
pop-up menu.
4 To choose the zone you want, choose a new zone from the “Current
zone” pop-up menu (if available).
5 Close the AppleTalk control panel.
6 If you have made configuration changes, an alert box asks if you want to
save changes. Click the Save button.
If you have changed the default port, the alert box also tells you that the
change will interrupt any AppleTalk services that are established.
Your changes are saved as the default configuration and take effect
immediately.
23
You can connect to an
AppleTalk network through
the printer port, the modem
port, the built-in Ethernet
interface, or any additional
network interface cards
installed in your server.