Apple Newton Press (Macintosh) - Manual (Page 6)

These instructions tell you how to restart your computer with the extensions
turned off (which prevents incompatible software from interfering with the
installation) and how to use the Installer program.
1 Quit any application programs that are open.
2 While holding down the Shift key on the keyboard, choose Restart from the Special
menu. Don’t release the Shift key until you see the “Extensions Off” message on your
screen, or until your normal desktop appears.
3 Insert the Install 1 disk for Newton Press into a floppy disk drive.
The disk’s icon appears on the desktop.
4 Double-click the disk icon to open it.
5 Double-click the Installer icon to start the Installer program.
IMPORTANT The Installer checks whether you have the correct system
software and enough free space on your hard disk for installation. If not, it
displays a message telling you what you need. You won’t be able to install the
software until you correct the problem. If it says you don’t have the correct
system software, you can purchase a new version from your Apple-authorized
dealer.
6 After you read the information on the screen, click Continue.
The Install dialog box appears.
7 Make sure that the disk named in the Destination Disk box is the one on which you want
to install the software. If not, click Switch Disk until the correct disk name appears.
6 Chapter 1