Apple DVD Studio Pro 4 - Manual (Page 256)

If the overlay should not appear in the normal selection state, set the opacity settings to
0 for each overlay color.
8 Select Selected and Activated under Selection State and set the highlight color settings
for the selected and activated states. Set the color and opacity settings using the same
method used in step 7. You will not see these settings take effect until you create buttons
on the menu.
Configuring the Menu Inspector for Standard Menus
The tabs within the Menu Inspector provide a variety of menu configuration settings.
These settings control everything from background and overlay configuration, to transition
and timeout settings.
The Menu Inspector has five tabs: General, Menu, Transition, Colors, and Advanced.
The Colors tab changes depending on whether you are using simple or advanced overlay
color mapping.
Settings at the Top of the Menu Inspector for Standard Menus
There are three settings at the top of the Menu Inspector:
• Name: Enter the name for this menu.
• Est. Size: Displays the estimated amount of disc space the menu requires based on the
type and duration of the assigned assets.
• Background: Choose the menu’s background. See Choosing the Menu’s Background
for more information.
256 Chapter 13 Creating Menus Using the Standard Method