Starting a format process – Apple DVD Studio Pro 4 User Manual
Page 585
In addition to the VIDEO_TS or HVDVD_TS folder, there are other items that can be part
of the format process:
• A folder specified by the DVD-ROM content setting
• DVD@CCESS Installers
You can change or set the folder to use for DVD-ROM content either when specifying the
preformat settings or while configuring the format process. The DVD@CCESS Installers
are included if the project used DVD@CCESS links and the Embed Text Data checkbox in
the Disc Inspector is selected. See
for more information on DVD@CCESS.
You can also choose to read content from a DLT drive and format that content. See
for more information.
Starting a Format Process
You can set the format process to start automatically after a build or you can manually
start the format. In either case, a window appears at the beginning of the format process;
you can set the format properties here, if you have not already set them in the Disc
Inspector.
To format your project
1
Do one of the following:
• Choose File > Advanced Burn > Format (or press Command-F) to perform a format
only.
• Click Format in the toolbar to perform a format only.
• Choose File > Advanced Burn > Build and Format (or press Command-Option-F) to
perform both a build and a format. See
About the Build/Format Command
for more
information.
• Click Build/Format in the toolbar to perform both a build and a format.
585
Chapter 22
Finishing a Project