Apple DVD Studio Pro 4 - Manual (Page 362)

To modify a button’s transition
1 Select the button to be modified.
2 Click the Transition tab in the Button Inspector.
The Transition setting shows “Same as Menu” by default.
3 Choose the transition to use from the Transition pop-up menu.
You can choose “not set” to disable transitions for that button.
4 Configure the transition using its specific parameters.
Transition Tab in the Menu and Button Inspectors
The Transition tabs in the Menu and Button Inspectors are identical—the only difference
is that the Transition pop-up menu in the Button Inspector has a “Same as Menu” choice
that the Menu Inspector does not have.
• Start thumbnail: Shows the video frame that a still transition will start from.
• Transition thumbnail: Provides a preview of a still transition when you click the Preview
button, or a preview of a video transition when you click the Play button.
• End thumbnail: Shows the video frame that a still transition will end with. This thumbnail
is empty in the Menu Inspector unless you have used the End pop-up menu to specify
an ending frame.
• Transition: Choose the transition to use. In the Menu Inspector, this sets the default
transition for this menu, which you can override at each button.
• not set: Disables transitions for this menu or button.
• Standard Transition: Creates a transition clip based on the Standard Transitions
supplied with DVD Studio Pro.
362 Chapter 16 Using Advanced Menu Features