Apple DVD Studio Pro 4 - Manual (Page 560)

See Setting the Project’s First Play for information on setting the First Play for different
types of projects. See Assigning the First Play Element for information on setting the
First Play using the Outline or Graphical tab.
General Tab in the Disc Inspector
All of the settings in the General tab except the DVD-ROM settings must be set before
building a project.
Standard Settings
• DVD Standard: Shows the DVD standard for this project.
• SD DVD: When set to SD DVD, you can convert the project to HD-based DVD by
clicking the HD DVD button.
• HD DVD: When set to HD DVD, however, you cannot change the project back to SD
DVD. See Setting the DVD Standard for more information.
• Video Standard: Select the type of video used in this project, NTSC or PAL. This must
be set before you import any video assets. See Setting the Video Standard for more
information.
Streams
• Audio: You can choose an audio stream that will serve as the initial active stream,
overriding the DVD player’s setting. The default setting is “not set,” which lets the DVD
player control the stream setting.
Note: The word Empty in parentheses after a stream number indicates that that stream
is currently empty.
• Angle: You can choose a video stream that will serve as the initial active stream,
overriding the DVD player’s setting. The default setting is “not set,” which lets the DVD
player control the stream setting.
560 Chapter 22 Finishing a Project