Lull 944E-42 Service Manual - Manual (Page 536)

Electrical System
9.26 Model 644E-42/944E-42 Rev. 6/04
ECM Fuses
1. Locate the two fuse holders. Remove the clear
plastic protective cover (1) from the holder (2).
2. Remove the failed fuse from the holder and replace
with a new fuse.
3. Reassemble the plastic cover onto the fuse holder
and securely snap the cover in place. Replace any
tie wraps that were removed, securing the fuse
holders to the wire harness.
b. 644E-42 Engine Compartment Relay Removal
To remove the relays (3 and 4) from inside the engine
compartment, remove the mounting screws and
washers (5). When re-installing the relays torque the
mounting hardware to 5 - 9 lb-ft (7 - 12,5 Nm).
c. 944E-42 Engine Compartment Relay Removal
To remove the relays (6) from inside the engine
compartment, remove the mounting screws and
washers (7 or 8). When re-installing the relays torque the
mounting hardware to 5 - 9 lb-ft (7 - 12,5 Nm).
410 830 2
OU1320
1
2
2
MU0360
3
4
5
MU5420
7 8
6