Lull 944E-42 Service Manual - Manual (Page 814)

Transfer Carriage
11.12 Model 644E-42/944E-42 Rev. 6/04
20. Coat the locknuts (1) with Loctite ® 242 (blue). Install
locknuts (1), washers (2), Lull logo plate (3) and
black backing (4) at the rear of the vehicle (5).
Torque locknuts to, 29 - 51 lb-ft (40 - 70 Nm).
21. Replace the boom as described in Section 3.3.3, b.
“Outer Boom Installation.”
22. If the vehicle has dual batteries, connect both
negative battery cables (6 and 7) to both batteries.
Connect the lower negative battery cable (6) to the
negative (-) terminal on the lower battery (8). Swing
the upper battery box (9) in and make sure that the
lip (10) on the upper battery box slides below the
knob (11). Secure in place with the knob (11).
23. Close and lock the engine compartment cover.
24. If required, replace any decals according to their
previous positions. (Refer to the proper Parts Manual
for correct locations).
MU1630
1
2
3
4
5
MU0650
6
7
8
11
10
9