Lukas LH 2/ 1,8-70 DIN - Manual (Page 23)

23
Technical data 12.
Because all values are subject to tolerances, there cannot be any differences between the
data of your device and the data of the following tables!
12.1 Data of the hand pumps
12.1.2 Dimensions, weight, usable quantity and fill quantity
NOTE:
The dimensions of the hand pumps are exclusively dependent on the size of the
hydraulic fluid tank. The types of hand pumps are not outwardly distinguishable
from the outside at the pump head.
The weights, usable quantities and fill quantities of the hand pumps are
exclusively dependent on the size of the hydraulic fluid tank.
LH 2 / 1.8 - 50
Tank size max. operating
pressure in MPa
(1 MPa = 10 bar)
12.1.1 Pump labelling
Model series
NOTE:
The automatic pressure switch from low pressure to high pressure occurs at
2 MPa (= 20 bar)
Hand pump with fittings:
Hand pump with monocouplings:
Tank size Dimensions Weight min. required
l x w x h
(incl. max. hydraulic
fluid fill level)
Fill quantity
1,8 [l]
660 x 200 x 160 [mm] 7 [kg] 2,38 [l]
25.98 x 7.87 x 6.30 [in.] 15.4 [lbs.] 0.63 [gal.-US]
3,8 [l]
676 x 200 x 160 [mm] 11,3 [kg] 4,61 [l]
26.61 x 7.87 x 6.30 [in.] 24.9 [lbs.] 1.22 [gal.-US]
Tank size Dimensions Weight min. required
l x w x h
(incl. max. hydraulic
fluid fill level)
Fill quantity
1,8 [l]
761 x 200 x 160 [mm] 7,5 [kg] 2,38 [l]
29.96 x 7.87 x 6.30 [in.] 16.5 [lbs.] 0.63 [gal.-US]
3,8 [l]
777 x 200 x 160 [mm] 11,8 [kg] 4,61 [l]
30.59 x 7.87 x 6.30 [in.] 26.0 [lbs.] 1.22 [gal.-US]