Snorkel TB47J - Manual (Page 22)

Chapter 5 – Gauges and Displays
18 TB47J – 0075182
Hydraulic Fluid Filter Gauge
The fluid filter gauge (refer to Figure 5.6) is located on the
return line filter on the left side of the reservoir. The reser-
voir is behind the door on the left side of the turntable.
During high pump flow situations, the gauge indicates
the condition of the filter. When the needle on the gauge
is in the red zone, it is time to change the filter.
Figure 5.6 – Hydraulic Fluid Filter Gauge
Fluid Level and Temperature Gauge
A gauge on the right end of the reservoir displays the
level and temperature of the hydraulic fluid (refer to Fig-
ure 5.7).
Figure 5.7 – Hydraulic Fluid Gauge
If the temperature rises above 200°F (93°C) stop machine
operation and let the fluid cool before resuming opera-
tion.
Figure 5.4 – Gasoline or Diesel Fuel Tank
LPG tanks have a fuel gauge that has two scales. One
scale measures the fuel level when the tank is mounted
vertical and the other is used when the tank is mounted
horizontal (refer to Figure 5.5).
Figure 5.5 – LPG Fuel Tank
The LPG tank is mounted horizontally behind the door on
the right side of the turntable. Read the horizontal scale
to determine the fuel level.
Engine Oil
The engine oil level is measured with a dipstick. The dip-
stick is the only way to accurately determine the engine
oil level. The engine oil level should always be between
the add and full marks on the dipstick.
Fluid Level and
Temperature Gauge
Filter Gauge
Horizontal Fuel Gauge
Fuel Level