IKA KS 260 control - Manual (Page 34)

34
HS/KS260 0305
AS 260.1 Universal attachment
AS 260.2 Holding bracket adapter
AS 260.3 Dish attachment
AS 260.5 Separating funnel attachment
(HS/KS 260 control version only)
PC 5.1
Adapter IKA - Control
PC 1.5 Cable
PC 2.1 Cable AK 2.1 Cable
PC 1.2 Adapter AK 2.2 Cable
Design voltage: VAC 230± 10%
or VAC 115± 10%
Design frequency: Hz 50/60
Input power: W 45
Speed range: HS rpm 0 - 300
Speed range: KS rpm 0 - 500
Perm. duration of operation: % 100
Perm. ambient temperature: °C +5 to +50
Perm. relative humidity: % 80
Protection class acc. to DIN 40 050: IP 21
Protection class:
I
Overvoltage category: II
Contamination level: 2
Operation at a terrestrial
altitude: m max. 2000 above sea level
Drive: Speedcontrol asyn-
chronous motor
Protection at overloaded: Temperature sensor
in motor winding
Fuses on apparatus plug: A T1AL (Id-Nr. 13 637 00)
Shaking motion: mm KS - Ø10 orbital
mm HS - 20 to and fro
Max. load: kg 7,5
Dimensions: (B x H x T) mm 360 x 97 x 420
Weight: kg 8,1 (basic)
kg 8,8 (control)
HS/KS 260 basic
Speed setting: Analog (infinitely variable)
Rotary knob on front side left
Speed display:
10 LED’s with scale-in
30 rpm steps (HS) und 50
rpm steps (KS)
Max. speed
deviation from idle: % ±10
Time setting: three indexing positions /
Rotary knob on the front key button 10 steps from
side right 5 - 50 min in 5 min steps
Time display: 10 LED’s with scale in
5 min steps
Max. time
deviation from idle: % ±1
HS/KS 260 control
Speed setting: Digital
Rotary knob on the front (1 step = 10 rpm)
side left
Speed display: LCD - Display
Max. speed
deviation from idle: % ±1
Time setting: Digital
Rotary knob on the front (1 step = 1 min)
side right
Time display: LCD - Display
max. 9h 59min
Max. time deviation from idle: % ±1
Interface: RS 232 C / analog
Accessories
Technical data