Ignition, Ignition -10 – JLG 4017PS Operator Manual User Manual
Page 54
Advertising
Section 3 - Controls and Indicators
3-10
31200753
Ignition
• Position 0 - Engine off.
• Position I - Voltage available for all electrical functions.
• Position II - Wait to start engine until preheat indicator on instrument panel goes
out.
• Position III - Engine start. In the event the engine does not start, rotate key to
position 0 then back to position III to re-engage the starter.
• Position P (if equipped for platform) - Power transferred to platform.
Note: Key is removable in the 0 and P positions.
OZ2300
0
I
II
III
P
Advertising
This manual is related to the following products: