JLG 4017PS Operator Manual - Manual (Page 112)

Section 5 - Attachments and Hitches
5-20 31200753
Mechanical Quick Attach
This installation procedure is designed for one-person operation. Prior to exiting cab,
perform “Shut-Down Procedure” on page 4-3.
1. Tilt quick attach forward to provide clearance.
Unhook lock pin handle and pull to disengage
lock pin.
2. Align attachment pin with recess in attachment.
Raise boom slightly to engage attachment pin in
recess.
3. Tilt quick attach back to engage attachment.
4. Push lock pin handle to engage quick attach lock
pin and secure with hook.
5. If attachment is equipped, connect auxiliary hydraulic hoses. See “Hydraulic
Operated Attachment” on page 5-22.
OAM2850
OAM2860
OAM2870
OAM2870