JLG 4017PS Operator Manual - Manual (Page 123)

Section 5 - Attachments and Hitches
5-31 31200753
To Fork Position:
The attachment auxiliary hydraulic roller switch (3) controls fork position.
• Push roller switch down to shift forks in.
• Push roller switch up to shift forks out.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-11.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could
damage forks or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
WARNING
CRUSH HAZARD. Do not use rotation to push or pull objects or load. Failure to
comply could cause object or load to fall.