JLG 4017PS Operator Manual - Manual (Page 110)

Section 5 - Attachments and Hitches
5-18 31200753
Hydraulic Quick Attach
This installation procedure is designed for one-person operation.
1. Tilt quick attach forward to provide clearance.
Check to be sure lock pin is disengaged.
2. Align attachment pin recess with attachment pin.
Raise boom slightly to engage attachment pin in
recess.
3. Tilt quick attach back to engage attachment.
4. Press and hold button (1) and at the
same time push roller switch down (2) to
engage lock pin or push roller switch up
to disengage lock pin.
5. Raise boom to eye level and visually check that the lock pin protrudes through
the attachment hole. If the pin does not protrude through the attachment hole,
place the attachment on the ground and return to step 2.
6. If attachment is equipped, connect auxiliary hydraulic hoses. See “Hydraulic
Operated Attachment” on page 5-22.
OAM2630
OAM2640
OAM2650
2
1
OB0250