JLG 4017PS Operator Manual - Manual (Page 56)

Section 3 - Controls and Indicators
3-12 31200753
Transmission Control Lever (if equipped)
Direction of Travel Selection
Transmission control lever (1) engages forward or reverse travel.
• Push lever forward for forward travel; pull lever rearward for reverse travel. Move
lever to centered position for neutral.
• Forward or reverse travel can be selected while in any gear.
• When traveling in reverse, the back-up alarm will automatically sound.
• Drive in reverse and turn only at slow rates of speed.
• If clutch lock is activated, do not increase engine speed with the transmission in
forward or reverse and the service brake depressed in an attempt to get quicker
hydraulic performances. This could cause unexpected machine movement.
WARNING
TIP OVER/CRUSH HAZARD. Bring telehandler to a complete stop before
shifting transmission. A sudden change in direction of travel could reduce stability
and/or cause load to shift or fall.
OZ4310
1
N
F
R