JLG DVSP Series Operator Manual - Manual (Page 30)

SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3-10 – JLG Lift – 3121135
Selecting Programmable Item to Adjust Adjusting Programmable Setting
TO EXIT Programming Mode after adjusting program-
mable settings, power machine down with either the
Main Power Selector Switch or Emergency Stop But-
ton.
1. Use the Platform UP/DOWN buttons (1) to scroll
through the list of programmable items available to
your programming level.
2. Once a programmable item to be adjusted is selected,
press the Brake Release button (2) to enter that set-
tings’ adjustment mode.
1 2
1. Adjust the programmable setting using the Platform
UP/DOWN buttons (1), see Table 3-4 for range of set-
tings for that item.
2. Once parameter is set for the programmable item,
press the Brake Release button (2), this will enter the
parameter and return you to the Programmable Set-
tings Menu.
1 2