JLG DVSP Series Operator Manual - Manual (Page 55)

SECTION 5 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
3121135 – JLG Lift – 5-1
SECTION 5. GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
5.1 INTRODUCTION
This section of the manual provides additional necessary information to the operator for proper operation and maintenance
of this machine.
The maintenance portion of this section is intended as information to assist the machine operator to perform daily mainte-
nance tasks only, and does not replace the more thorough Preventive Maintenance and Inspection Schedule included in the
Service and Maintenance Manual.
Other Publications Available Specific to this Machine:
Service and Maintenance Manual
GLOBAL ................................................................... 3121136
Illustrated Parts Manual
ANSI ......................................................................... 3121137
CE ............................................................................ 3121839
5.2 GENERAL SPECIFICATIONS
Machine Specifications
SPECIFICATION 15DVL 20DVL 15DVSP 20DVSP
Gross Machine Weight (Platform Empty): 2,105 lb.
(955 kg)
2,105 lb.
(955 kg)
2,150 lb.
(975 kg)
2,150 lb.
(975kg)
Machine Height (Platform Stowed): 78 in. (198cm)
Maximum Ground Bearing Pressure: (per wheel) 800 lb. (360 kg)
Maximum Operating Incline: 1.5°
Maximum Travel Grade (Gradeability):
(Platform STOWED ONLY)
20%
Maximum Travel Grade (Side Slope):
(Platform STOWED ONLY)
5°
Maximum Drive Speeds (Operator Variable): 0.5 - 2 mph (0.8 - 3.2 kph)
Machine Base - Overall : (Width x Length) 29.25 in.- W x 52 in.- L (74cm) x (132cm)
Maximum Wind Speed: 0 mph (0kph) - Machine rated for indoor use only
Maximum Horizontal Manual Side Force:
(Platform fully extended with Maximum load)
45 Pound Force (200 Newtons)
Maximum Hydraulic System Pressure:
(Recommended initial setting) 2600 PSI
(180 Bars)
1800 PSI
(124 Bars)
2600PSI
(180 Bars)
2800 PSI
(193 Bars)
Hydraulic System Capacity: 5 qts. U.S. (4.7 L)
Hydraulic Reservoir Capacity: 1 Gallon (3.78 L)