19 wheel torque chart -29 – JLG 740AJ Operator Manual User Manual
Page 121
Advertising
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121295
– JLG Lift –
6-29
2. Tighten nuts in the following sequence:
3. The tightening of the nuts should be done in stages. Fol-
lowing the recommended sequence, tighten nuts per
wheel torque chart.
4. Wheel nuts should be torqued after first 50 hours of
operation and after each wheel removal. Check torque
every 3 months or 150 hours of operation.
Table 6-19. Wheel Torque Chart
TORQUE SEQUENCE
1st Stage
2nd Stage
3rd Stage
70 ft. lbs.
(95 Nm)
170 ft. lbs.
(225 Nm)
300 ft. lbs.
(405 Nm)
Advertising