JLG 740AJ Operator Manual - Manual (Page 28)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
2-8 – JLG Lift – 3121295
14. Turntable Lock - See Inspection Note.
15. Auxiliary Power Pump - See Inspection Note.
16. Control Valve (Tank Compartment) - See Inspection
Note.
17. Turntable Bearing and Pinion - See Inspection Note.
18. Hydraulic Oil Medium Pressure Filter Housing -
Housing Secure; no visible damage or leakage.
19. Hydraulic Oil Return Filter Housing - Housing
secure; no visible damage; no evidence of leakage.
20. Manual Descent - See Inspection Note. (if equipped)
21. LP Gas Tank - Brackets, hose and fittings secure; no
visible damage, no missing parts. (If Equipped)
22. Hydraulic Oil Supply - Recommended oil level sight
gauge. (Check level with cold oil, systems shut down,
machine with booms retracted and lowered) Cap in
place and secure.
23. Hydraulic Oil Breather - Element in place, not
clogged, no sign of overflow.
24. Fuel Supply - Fuel filler cap secure. Tank - See
Inspection Note.
25. Swing Drive Motor and Brake - See Inspection Note.
26. Door and Latches, Right Side - Hood door and
latches in working condition, See Inspection Note.
27. Oscillating Cam Valve - See Inspection Note. (If
Equipped)
28. Tie Rod and Steering Linkage, - See Inspection
Note.
29. Dual Capacity and Horizontal Cutout Limit
Switches if equipped - Properly secured, no damage
to the switches, arm free to move, and free from dirt
and grease.
30. Oscillating Axle - See Inspection Note. (If Equipped)
Figure 2-4. Daily Walk-Around Inspection. (Sheet 3 of 4)