Electrocution hazards, Electrocution hazards -4 – JLG 740AJ Operator Manual User Manual
Page 14
SECTION 1 - SAFETY PRECAUTIONS
1-4
– JLG Lift –
3121295
• Before operating the machine, make sure all gates are
closed and fastened in their proper position.
• Keep both feet firmly positioned on the platform floor at all
times. Never use ladders, boxes, steps, planks, or similar
items on platform to provide additional reach.
• Never use the boom assembly to enter or leave the plat-
form.
• Use extreme caution when entering or leaving platform.
Be sure that the boom is fully lowered. Refer to Section
2.5 for additional information on the proper use of the Fall
Arrest System. It may be necessary to telescope out to
position the platform closer to the ground for entry/exit.
Face the machine, maintain “three point contact” with the
machine, using two hands and one foot or two feet and
one hand during entry and exit.
Electrocution Hazards
• This machine is not insulated and does not provide pro-
tection from contact or proximity to electrical current.