Service and maintenance, Installation and removal, Removal – JLG Workstation in the Sky-Boom Lifts User Manual
Page 109: Installation, Installation and removal -7 removal -7, Installation -7
Advertising
SECTION 5 - SKYCUTTER™
3124242
– JLG Accessory Manual –
5-7
SERVICE AND MAINTENANCE
Refer to Miller Plasma Cutter Service and Maintenance Manual.
INSTALLATION AND REMOVAL
Removal
1. Unplug SkyCutter™ at twistlock plug.
2. Remove air/gas source.
3. Unbolt SkyCutter™ from weldment support.
4. Remove for storage.
Installation
1. Place SkyCutter™ in Weldment support.
2. Bolt top plate weldment support.
3. Connect twistlock plug.
4. Connect air/gas source.
Advertising