JLG Workstation in the Sky-Boom Lifts - Manual (Page 19)

SECTION 1 - SKYGLAZIER™
3124242 – JLG Accessory Manual – 1-5
SAFETY PRECAUTIONS
General
READ AND UNDERSTAND THE OPERATORS MANUAL FOR THE SPECIFIC JLG MODEL
BEING USED. MAKE SURE LOAD IS SECURED WITH LOAD STRAP.
DO NOT OVERLOAD TRAY OR PLATFORM. TOTAL MACHINE CAPACITY IS REDUCED
WHEN TRAY IS INSTALLED.
WITH THE SKYGLAZIER INSTALLED, THE ORIGINAL PLATFORM CAPACITY RATINGS
ARE REDUCED AS SPECIFIED IN TABLE 2. DO NOT EXCEED THE NEW PLATFORM
CAPACITY RATING. REFER TO CAPACITY DECAL LOCATED ON TRAY.
AN INCREASE OF THE AREA EXPOSED TO THE WIND WILL DECREASE STABILITY.
LIMIT PANEL AREA TO 32 SQ.FT. (3 SQ.M)
1. Make sure no personnel are beneath platform.
2. Do not exit platform over rails or stand on rails.
3. Only use this option on models specified.
4. Remove tray when not in use.
PREPARATION AND INSPECTION
1. Check for cracked welds and damage to tray. Make sure tray is prop-
erly secured to platform.
2. Check to ensure strap is not torn or frayed.
OPERATION
• Load SkyGlazier™ with panel and secure with strap. Position panel to its
desired location.
SERVICE AND MAINTENANCE
• Replace torn or frayed straps, bent or crushed tray, missing or illegible
decals.
• Check for loose nuts and bolts and Torque loose nuts and bolts to JLG
Torque Chart specifications.