Warning – JLG G10-43A (0160005444 & After) Operator Manual User Manual
Page 107
Advertising
Section 5 - Attachments
5-25
31200150
Installation Procedure:
• Refer to “Attachment Installation” on page 5-13.
Operation:
• Travel in accordance with the requirements set forth in Section 1 - General
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could
damage forks or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
WARNING
CRUSH HAZARD. Do not use fork positioning to push or pull objects or load.
Failure to comply could cause object or load to fall.
Advertising
This manual is related to the following products: