JLG G10-43A (0160005444 & After) Operator Manual - Manual (Page 90)

Section 5 - Attachments
5-8 31200150
Sample Capacity Chart
Before S/N 0160037671
Note: This is a sample capacity chart only! DO NOT use this chart, use the one
located in your operator cab.
WARNING
TIP OVER HAZARD. All loads shown on rated capacity chart are based on
machine being on firm ground with frame level (see page 4-7); the forks being
positioned evenly on carriage; the load being centered on forks; proper size tires
being properly inflated; and the telehandler being in good operating condition.
XXXX-XXXX
48" & 72"
CARRIAGES
MODEL
XXXXX
USE WITH:
1234-5678 48" CARRIAGE
8765-4321 72" CARRIAGE
RATED CAPACITY @ 2 FT. LOAD CENTER
48'
44'
40'
36'
32'
28'
24'
20'
16'
12'
8'
4'
0'
-4'
-8'
1
2
3
4
5
6
69°
60°
50°
40°
30°
20°
10°
0°
-6°
9000
LBS
7000 LBS
6000 LBS
5000 LBS
4
0
00
L
B
S
3000 LBS
2000 LBS
1
100 LBS
DEDUCT 350 LBS
FROM ALL CAPACITIES
WHEN MACHINE IS
EQUIPPED WITH WINCH
36' 0' 4' 8' 12' 16' 20' 24' 28' 32'
OWO650
This Capacity Chart may be
used with this model ONLY.
The model of your
telehandler is indicated on
the boom or chassis.
Model XXXXX is used for
demonstration purposes only.
Boom Extension
Indicator (arc)
Load zones indicate
the maximum weight
that may be safely lifted.
These numbers must match the
model/option number stamped
on the attachment ID Plate.
Boom Angle