JLG G10-43A (0160005444 & After) Operator Manual - Manual (Page 138)

Section 7 - Lubrication and Maintenance
7-10 31200150
7.5 OPERATOR MAINTENANCE INSTRUCTIONS
Fuel System
A. Fuel Level Check
1. Check fuel gauge (1) located on instrument panel in cab.
2. If fuel is low, proceed to fuel source and perform “Shut-Down Procedure” on
page 4-5.
3. Turn fuel tank cap (2) and remove from filler neck.
4. Add diesel fuel as needed.
5. Replace and secure fuel tank cap.
Note: Replenish diesel fuel at end of each work shift to minimize condensation.
NOTICE
EQUIPMENT DAMAGE. Do not allow machine to run out of fuel during operation.
See Engine Operation & Maintenance Manual for details prior to servicing.
10
OW0970 OW0990
OY1760
1
2
1
BEFORE S/N 0160040675 EXCLUDING
0160040468 & 0160040672
S/N 0160040675 & AFTER
INCLUDING 0160040468 &
0160040672