JLG G10-43A (0160005444 & After) Operator Manual - Manual (Page 149)

Section 7 - Lubrication and Maintenance
7-21 31200150
Engine Cooling System
A. Engine Coolant Level Check
Before S/N 0160040675 excluding 0160040468 & 0160040672
1. Perform “Shut-Down Procedure” on page 4-5.
2. Open the engine cover.
3. When coolant is cool remove radiator cap (3). Check coolant level in radiator.
4. If coolant is low, add coolant as required.
5. Replace radiator cap.
6. Close and secure the engine cover.
Note: When filling the engine with coolant, the maximum fill rate is 2.4 gallon per
minute (9 liters per minute).
50
OW0980 OW1070
OY0750
3