Dual fork positioning carriage, Dual fork positioning carriage -24 – JLG G10-43A (0160005444 & After) Operator Manual User Manual
Page 106
Section 5 - Attachments
5-24
31200150
Dual Fork Positioning Carriage
Use Carriage Attachment Capacity Chart
To determine maximum capacity, refer to “Telehandler/
Attachment/Fork Capacity” on page 5-6.
The boom joystick (1) controls lift/lower and extend/retract movement of the boom.
The attachment tilt joystick (2) controls fork tilt.
• Move joystick back to tilt up.
• Move joystick forward to tilt down.
To Fork Position:
The auxiliary hydraulic joystick (3) controls the fork position.
Left Hand Hydraulic Joystick
• Move joystick up to shift forks out.
• Move joystick down to shift forks in.
Right Hand Hydraulic Joystick
• Move joystick left to shift forks out.
• Move joystick right to shift forks in.
OZ3670
OY2470
1
2
3
3
RIGHT HAND AUXILIARY
HYDRAULIC JOYSTICK
LEFT HAND AUXILIARY
HYDRAULIC JOYSTICK