Boom head-mounted winch (before s/n 0160037671), Warning – JLG G10-43A (0160005444 & After) Operator Manual User Manual

Page 126

Advertising
background image

Section 5 - Attachments

5-44

31200150

Boom Head-Mounted Winch (Before S/N 0160037671)

Use Carriage Attachment Capacity Chart

To determine maximum capacity, refer to “Telehandler/
Attachment/Fork Capacity”
on page 5-6.

Suspend loads in accordance with requirements set forth in Section
1 - General Safety Practices.

The boom joystick (1) controls lift/lower and extend/retract movement of the boom.

The auxiliary hydraulic joystick (3) controls the winch.

• Move joystick up lower cable.

• Move joystick down to raise cable.

Operation:

• Weight of rigging must be included as part of total load being lifted.

WARNING

CRUSH HAZARD. Maintain a minimum of three wraps of wire rope on the cable
drum at all times. Failure to comply could cause object or load to fall.

OY0650

OY0661

1

3

Advertising
This manual is related to the following products: