JLG 24RS Operator Manual - Manual (Page 56)

SECTION 4 - MACHINE OPERATION
4-12 – JLG Lift – 3121286
4.8 FUNCTION SPEED CONTROL
This control affects the speed of telescope
and platform rotate. Turning the knob all the
way counterclockwise until it clicks puts
drive, main lift and swing into creep mode.
4.9 SHUT DOWN AND PARK
Shut Down and Park
The procedures to shut down and park the machine are as
follows:
1. Drive machine to a reasonably well protected area.
2. Ensure boom is lowered over rear drive axle.
3. Shut down Emergency Stop at Platform Controls.
4. Shut down Emergency Stop at Ground Controls. Posi-
tion Platform/Ground Select switch to the center Off
position.
5. If necessary, cover Platform Controls to protect instruc-
tion placards, warning decals, and operating controls
from hostile environment.