JLG 24RS Operator Manual - Manual (Page 84)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6-12 – JLG Lift – 3121286
6. Wheel Drive Hub
Lube Point(s) - Level/Fill Plug
Capacity - 20.5 oz. (0.6 L)
Lube - Mineral Oil ISO VG150
Interval - Check level every 3 months or 150 hrs of opera-
tion; change every 2 years or 1200 hours of operation
7. Oil Change with Filter
Lube Point(s) - Fill Cap/Spin-on Element
Total Capacity (Engine & Oil Cooler)- 15 Quarts (14.2 L) w/
Filter
Lube - EO
Interval - Check level daily; change every 600 hours or six
months, whichever comes first. Adjust final oil level by
mark on dipstick.
FILL PORT
15°
OIL SHOULD BE
TO THIS HEIGHT