JLG 723A Operator Manual - Manual (Page 105)

Section 5 - Attachments and Hitches
5-21 31200567
To Side Shift:
The auxiliary hydraulic buttons control the carriage side shift.
• Press and hold button (3) to side shift right or press and hold button (4) to side
shift left.
OR
• While pressing and holding button (5), move joystick forward to side shift right or
move joystick back to side shift left.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-7.
Operation:
• Travel in accordance with the requirements set forth in Section 1 - General
Safety Practices.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could
damage forks or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
WARNING
CRUSH HAZARD. Do not use side shift carriage to push or pull objects or load.
Failure to comply could cause object or load to fall.