JLG 723A Operator Manual - Manual (Page 115)

Section 5 - Attachments and Hitches
5-31 31200567
To Open/Close Bale Handler:
The auxiliary hydraulic buttons control the open/close movement of the bale handler.
• Press and hold button (3) to close bale handler or press and hold button (4) to
open bale handler.
OR
• While pressing and holding button (5), move joystick forward to close bale
handler or move joystick back to open bale handler.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-7.
Operation:
• Travel in accordance with requirements set forth in Section 1 - General Safety
Practices.
Equipment Damage Precautions
• Do not use bale handler as a lever to pry material. Excessive prying forces could
damage bale handler or machine structure.
• Do not attempt to load material which is hard or frozen. This could cause severe
damage to quick attach or machine structure.