JLG 723A Operator Manual - Manual (Page 107)

Section 5 - Attachments and Hitches
5-23 31200567
To Side Shift:
The auxiliary hydraulic buttons control the carriage side shift.
• Press and hold button (3) to side shift right or press and hold button (4) to side
shift left.
OR
• While pressing and holding button (5), move joystick forward to side shift right or
move joystick back to side shift left.
To Fork Position:
The second auxiliary hydraulics switch enables fork positioning.
• While pressing and holding second auxiliary hydraulics switch (6), press and
hold button (3) to shift forks out or press and hold button (4) to shift forks in.
OR
• While pressing and holding second auxiliary hydraulics switch (6) and button (5),
move joystick forward to shift forks out or move joystick back to shift forks in.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-7.
Operation:
• Travel in accordance with the requirements set forth in Section 1 - General
Safety Practices.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could
damage forks or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
WARNING
CRUSH HAZARD. Do not use side shift carriage or fork positioning to push or
pull objects or load. Failure to comply could cause object or load to fall.