JLG 723A Operator Manual - Manual (Page 125)

Section 5 - Attachments and Hitches
5-41 31200567
Preparation and Setup:
1. Ensure the telehandler is on a firm surface and is level.
2. Engage the park brake. Blocking the wheels is also recommended.
3. Level the platform, front to back (attachment tilt).
4. Keep area under platform free from personnel.
5. When personnel are on platform, the operator must remain seated in cab with
personnel in direct line of sight.
6. DO NOT lift or carry persons in a bucket or on forks.
WARNING
FALL HAZARD. Never tilt the platform forward or rearward when the platform is
occupied.