JLG 723A Operator Manual - Manual (Page 93)

Section 5 - Attachments and Hitches
5-9 31200567
Hydraulic Quick Attach
This installation procedure is designed for one-person operation.
1. Tilt quick attach forward to provide clearance.
Check to be sure lock pin is disengaged.
2. Align attachment pin with recess in attachment.
Raise boom slightly to engage attachment pin in
recess.
3. Tilt quick attach back to engage attachment.
4. Press and hold switch (1) and button
(2), at the same time move the joystick
forward to engage the quick attach pin
or move the joystick back to
disengage the quick attach pin.
5. Raise boom to eye level and visually check
that the quick attach pin protrudes through
the attachment hole. If the pin does not
protrude through the hole, place the
attachment on the ground and return to
step 2.
6. If attachment is equipped, connect auxiliary hydraulic hoses. See “Hydraulic
Operated Attachment” on page 5-12.
OAH1590
OAH1600
OAH1610
OAH1620
1
2
OAL1930
ENGAGED DISENGAGED