JLG 723A Operator Manual - Manual (Page 102)

Section 5 - Attachments and Hitches
5-18 31200567
Side Tilt Carriage (619A & 723A)
Description P/N
Side Tilt Carriage, 48 in (1219 mm) .......................... 1001099613
Fork, Dual Taper 1.5x6x60 in (38x152x1524 mm).... 1001099457
Fork, Pallet 2x4x48 in (50x101x1219 mm) ............... 1001099458
Fork, Cubing 2x2x48 in (50x50x1219 mm)..................... 2340037
Use Side Tilt Carriage Attachment Capacity Chart
To determine maximum capacity, refer to “Telehandler/Attachment/Fork Capacity” on
page 5-2.
The joystick (1) controls lift/lower and extend/retract movement of the boom.
The attachment tilt roller switch (2) controls fork tilt.
• Push roller switch down to tilt up.
• Push roller switch up to tilt down.
OAL1550
OAH1690
1 2
OAH1700
5 3 4