JLG 723A Operator Manual - Manual (Page 113)

Section 5 - Attachments and Hitches
5-29 31200567
Carriage w/Round Fork
Description P/N
Carriage w/Round Fork, 1220 mm (48 in) ...................... 2340035
Use Carriage w/Round Fork Attachment Capacity Chart
To determine maximum capacity, refer to “Telehandler/Attachment/Fork Capacity” on
page 5-2.
The joystick (1) controls lift/lower and extend/retract movement of the boom.
The attachment tilt roller switch (2) controls fork tilt.
• Push roller switch down to tilt up.
• Push roller switch up to tilt down.
Installation Procedure:
Refer to “Attachment Installation” on page 5-7.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could
damage forks or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
OAH0530
OAH1690
1 2