JLG 723A Operator Manual - Manual (Page 116)

Section 5 - Attachments and Hitches
5-32 31200567
Bucket
Description P/N
Bucket, 0,8 m
3
(1.0 yd
3
) (L2906H, 2906H & 619A) ........ 0930008
Bucket, 0,9 m
3
(1.2 yd
3
) ................................................. 0930015
Bucket, 1,5 m
3
(2.0 yd
3
) (L2906H, 2906H & 619A) ........ 0930009
Bucket, 1,8 m
3
(2.4 yd
3
) ................................................. 0930016
Bucket w/ Teeth, 0,8 m
3
(1.0 yd
3
)
(L2906H, 2906H & 3507H) ............................................. 4805670
Bucket w/ Teeth, 1,0 m
3
(1.3 yd
3
)
(L2906H, 2906H & 3507H) ............................................. 4802100
Use Appropriate Bucket Capacity Chart
To determine maximum capacity, refer to “Telehandler/
Attachment/Fork Capacity” on page 5-2.
The joystick (1) controls lift/lower and extend/retract movement of the boom.
The attachment tilt roller switch (2) controls bucket tilt.
• Push roller switch down to tilt up.
• Push roller switch up to tilt down.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-7.
OZ0730
OAH1780
1 2