JLG 723A Operator Manual - Manual (Page 64)

Section 3 - Controls and Indicators
3-26 31200567
3.3 ANTI THEFT
Machines with the anti theft feature active require entering a numeric code before
operation to prevent unauthorized use. Code entry is accomplished using the display
and keypad.
1. Turn ignition switch to position I. If anti theft is active, the display (1) will prompt
the operator for a numeric code.
2. Use the up/down arrow buttons (2) to select the first digit.
3. Depress OK button (3) to confirm and move to the next digit.
4. Continue until the code is complete.
5. If an incorrect code is entered, the buzzer will sound briefly and the display will
prompt the operator again for the numeric code.
6. If the correct code is entered, normal start up can continue.
If the anti theft feature is active and the current access code is not known, it may be
viewed or changed by the machine owner in Operator Tools Menu (level 2 password
required). See Service Manual for information.
OAH1430
2 3
1
0
00
0000
0000
RPM
km/h