JLG 723A Operator Manual - Manual (Page 88)

Section 5 - Attachments and Hitches
5-4 31200567
Sample Capacity Chart
Note: This is a sample capacity chart only! DO NOT use this chart, use the one
located in your operator cab.
WARNING
TIP OVER HAZARD. All loads shown on rated capacity chart are based on
machine being on firm ground with frame level (see page 4-5); the forks being
positioned evenly on carriage; the load being centered on forks; proper size tires
being properly inflated; and the telehandler being in good operating condition.
OAH1520
XXX XX MAX
XX
XXXX
XXXXXXXXXX
XXXXXXXX
XXXXXXX
XX
X X X X X X
X
X
X
X
X
X
X
X
X
X
XXXX XX
XXXX XX
XXXX XX
XXXX XX
XXXX XX
XXXX XX
XXXX XX
XXXX XX
This Load Chart may be used with this model ONLY.
The telehandler model is indicated on the boom or chassis.
Model XXXX is used for demonstration purposes only.
Boom
Extension
Indicator (arc)
Boom Angle
Load zones indicate the
maximum weight that
may be safely lifted.
Load center must
be equal to or less
than value shown.
Attachment type,
weight and
dimensions must be
equal to or less than
the data shown.