JLG 67SL Operator Manual - Manual (Page 17)

SECTION 1 - SAFETY PRECAUTIONS
3121321 – JLG Lift – 1-7
reduced to a distance within the designed working dimen-
sions of the insulating barrier. This determination shall be
made by a qualified person in accordance with the
employer, local, or governmental requirements for work
practices near energized equipment.
DO NOT MANEUVER MACHINE OR PERSONNEL INSIDE PROHIBITED
ZONE (MAD). ASSUME ALL ELECTRICAL PARTS AND WIRING ARE
ENERGIZED UNLESS KNOWN OTHERWISE.
Tipping Hazards
• Ensure that the ground conditions are adequate to sup-
port the maximum tire load indicated on the tire load
decals located on the chassis adjacent to each wheel. Do
not travel on unsupported surfaces.
• The user should be familiar with the driving surface before
driving. Do not exceed the allowable sideslope and grade
while driving
.
• Do not elevate platform or drive with platform elevated
while on or near a sloping, uneven, or soft surface. Ensure
machine is positioned on a firm, level and uniformly sup-
ported surface before elevating platform or driving with
the platform in the elevated position.
• Before driving on floors, bridges, trucks, and other sur-
faces, check allowable capacity of the surfaces.
• Never exceed the maximum work load as specified on the
platform. Keep all loads within the confines of the plat-
form, unless authorized by JLG.